10-Hole 2-Way Channel Wing Connector - Electro-Galvanized FRFP/URFP Retrofit Foundation Plates High Load Capacity: Achieves allowable

High Load Capacity: Achieves allowable loads up to 7

The closed top EPDM FIX-A-FLASH RoofjackSQ was designed for an over-sized hole with a smaller diameter pipe where a standard Roofjack will not fit

Joist nails should be driven at an angle through the joist or truss into the header to maximize load capacity

Listed below are the approximate amounts of grout required to install one six-pack of SP58-58S asphalt anchors

Simpson Strong-Tie SDW Truss-Ply Screws are designed for high-strength fastening in double-ply trusses

10-Hole 2-Way Channel Wing Connector - Electro-Galvanized FRFP/URFP Retrofit Foundation Plates High Load Capacity: Achieves allowable10 Hole 2 Way Channel Wing Connector Electro Galvanized allows channels to be connected perpendicularly and can be used to create joints along a vertical piece of strut. 8 Hole 2 Way Wing Fittings allow for 2 arms to be created from the T shaped wing fitting. These Wing Fittings have 9 16" punched holes and should be used with like metals. Electro Galvanized Steel should be used in interior applications where conditions are dry, and humidity is low.