End of Material Sensor (Electro-mechanical) Sensors 50/60 Hz for 1 minute

50/60 Hz for 1 minute between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz

The HD19 PCB Kit is a PC board designed to go in an end user-provided

Functions OFF-delay timer 0 to 40 ms (1 to 20 ms: 1-ms increments

When used with Wintriss die protection controllers

Indicators Operation indicator (Orange LED) Protection circuits Output reverse polarity protection

End of Material Sensor (Electro-mechanical) Sensors 50/60 Hz for 1 minuteThe End of Material sensor is designed for metal stamping applications. It detects material run out, and prevents pulling of the coil end through the feeder or straightener. It also keeps the press from running without coil stock. The sensor is typically installed so that the arm rides on the material. When the material runs out, the arm drops onto the insulated pin below it, generating a ground signal that is detected by the die protection