Johnny Joint Rod End 2 1/2 Inch Weld-On 2.585 Inch X 0.640 Inch Ball Externally Greased Each RockJock 4x4 Brakes - Brake Drums - Drum Brake Hardware Kit Recommended backspacing for a 35x12

Recommended backspacing for a 35x12

you're not just equipping your vehicle for the next adventure

heavy duty

This kit is a turn key system for the Bronco owner that is looking to take down the night

0 & Drive: AWD / Note: BW4481

Johnny Joint Rod End 2 1/2 Inch Weld-On 2.585 Inch X 0.640 Inch Ball Externally Greased Each RockJock 4x4 Brakes - Brake Drums - Drum Brake Hardware Kit Recommended backspacing for a 35x12RockJock's weld on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty,